Important announcement of our new 1 Watt 2.4 Ghz SuperG radio. If you need high power then this is for you.
Model: KXS30SG

StarV3™ is a powerful Wireless platform that is designed for Enterprise-class networks that require a high level of performance and reliability.

We have recently released a new series of hardware, that is now available from our on-line store.

The new Lucaya M and X series of hardware are FCC and CE certified and shipping now.

Each system is powered by StarV3™, and contains a perpetual software upgrade license.

Pre-sales email networks@valemount.com to Lonnie.

For those interested in DIY systems, we provide firmware releases that can be installed onto a variety of hardware, and licensed from our webiste www.license-keys.com.

StarV3™ Base features and abilities [manual] (StarV3 1.3.x series)

• Management is via SSH, making use of an easy to use point-and-click interface
• Support for multiple network interfaces
• Support for multiple IPs on each interface
• Complete Atheros support (listed below)
• Static routing
• Policy (source) based routing
• 802.1d bridging with STP
• 802.1q VLAN
• Ethernet-over-IP (EoIP) support via VDS for LAN over LAN and VPN designs
• Dynamic routing (RIP, OSPF, BGP, and OLSR)
• Mesh networking via OLSR
• Captive portal / Hotspot (WISPr attribute support)
• Network monitoring via tcpdump and ping
• Beacon real-time network traffic monitor
• Command-shell with common networking tools
• DHCP client and server w/ static IP assignments for AP
• Firewall and Port Forwarding (via internal language, or iptables pass through)
• NAT, and Static 1:1 NAT
• Class-based Queuing (CBQ)
• Layer-7 filtering (not on single port boards)
• Recursive DNS
• PPPoE server (not on single port boards)
• Live over-the-wire[less] firmware upgrading

StarV3™ Atheros features and abilities

• Complete 11n (mimo) support up to 450Mbps (3x3, TxBF)
• Complete support for a wide range of Atheros PCI, mPCI, and PCIe devices
• Strives to be compliance based with both FCC and CE regulations
• Card disable support
• Detailed association display with live stats
• Support over 200 associations per card
• Link distances up to 230 km
• Full Duplex PtP (utilizes two cards)
• 11n AMPSU and AMPDU Aggregation support
• Adaptive Noise Immunity (ANI)
• Robust rate control
• Auto, Fixed, and MAX rate support
• Fixed and Auto channel selection
• Cloaking (Spectrum management; 5, 10, and 20 MHz wide channels)
• 802.11e QoS
• 802.11h TPC, DFS v1, and DFS v2 for FCC3, ETSI, and MKK4
• Dynamic WDS
• 802.11i WPA & WPA2/RSN (PSK, EAP-TLS, EAP-TTLS, and EAP-PEAP)
• Built-in WPA PSK and EAP authentication
• Radius-based WPA EAP authentication
• Shared-key and Open-system WEP (40, 64, and 128-bit keys)
• Static ACLs
• Radius ACLs w/ accounting and session limits
• Managed support (enhanced client control)
• Low signal threshold to eliminate clutter of distant weak radios.
• High signal threshold to eliminate clutter of nearby strong radios.

Atheros chipsets supported by StarV3™

• Complete Atheros AR5416 11n series support, 450Mbps (all known chip revisions supported)
• Legacy Atheros 802.11 a/b/g
  • MAC Revisions
    • AR5212A (AR5001X+), AR5212A (AR5002X)
    • AR5213A (AR5004X), AR5213A (AR5004G)
    • AR2413A (AR5005G), AR2414A (AR5005GS)
    • AR5413A (AR5006X), AR5414A (AR5006XS)
    • AR2315A (AR5006G), AR2316A (AR5006GS)
    • AR2413A, AR5413A, and AR2315A are 'LITE' chipsets and as such do not support Turbo, or SuperA/G features.
    • All known 11abg chips & Phys are supported.
      
  • Analog Revisions
    • AR5111, AR5112, AR2112, AR2413, AR2315, AR5413, AR5424
      
• RF Bands
  • 900Mhz - 930Mhz (using Ubiquiti SR9), limited to legal bands by firmware
  • 2.3Ghz - 2.7GHZ, limited to legal bands by firmware
  • 4.9Ghz - 6.1GHz, limited to legal bands by firmware
    

For more information, please contact us.
hours: 9:00am - 5:30pm weekdays (GMT - 8, PST)
e-mail: networks@valemount.com